40 inch Welex Co-ex Sheet Extrusion Line

Used Welex 40" wide co-ex sheet extrusion line, tested electrically and mechanically and to be shipped in working condition. Line consists of the following:
- 90mm (3.5") Welex single screw extruder with plugged vent.

For more details on 40 inch Welex Co-ex Sheet Extrusion Line click here

35" wide Welex Co-ex Sheet Extrusion Line

Used 35" wide Welex co-ex sheet extrusion line consisting of the following:

- Two 1.25" 24/1 co-extruders, each with approximately 10 hp DC motor with
SCR control.

- One 2.5" 30/1 extruder moddel 250 30/1 rhsv.

For more details on 35" wide Welex Co-ex Sheet Extrusion Line click here

60 inch Davis Standard Co-extrusion Line

Used 60" Davis Standard co-extrusion line. Line consists of the following:
- Extruder A: 100mm Davis Standard model 100MM35F, 30/1 L/D extruder. Electrically heated water cooled. Gearbox ratio is 17..

For more details on 60 inch Davis Standard Co-extrusion Line click here

HPM Sheet Take Off Unit and Cloren Masterflex Die

Used HPM sheet take off system including the following:
- 54" Cloeren Masterflex die with 45 degree restrictor bar, removable lower lip and quick gap. Mfd. 11/2006. Includes one spare lip.
- HPM moddel Sheet master III sheet take off having (3) 54" face x nominal 24" diameter rolls.

For more details on HPM Sheet Take Off Unit and Cloren Masterflex Die click here

Marshall and Williams Sheet Take Off Unit

(1) Used Marshall and Williams sheet take-off unit consisting of (3) 54" face rolls mounted in a vertical arrangement for a down stack operation. All three rolls measure 16" in diameter and are ceramiic coated.

For more details on Marshall and Williams Sheet Take Off Unit click here

Sheet Extrusion Line

We need sheet extrusion line for processing ABS, HIPS, PP, UHMWPE, PET, HDPE with following properties:
- Max. width: 1600 mm
- Max. thick: 10 to 12 mm
- Output: 250 to 300 kg. / hr.
- Machine shoould be in good maintenance
- Preferred make: J.

For more details on Sheet Extrusion Line click here

1040mm Omipa / Welex Co-extrusion Sheet Line

- 120 mm Omipa single screw extruder. 35D vented (1988). 165 KW DC motor with drive
- Maag 56/56 gear pump with DC motor and drive
- 860 mm wide EDI R 75 flex lip sheet die with decal facility
- 10040mm wide Welex 3 roll polishing stack model 17x41SLRH.

For more details on 1040mm Omipa / Welex Co-extrusion Sheet Line click here

Barmag Co-extrusion Sheet Film Line

Part-refurbished Co-extrusion sheet film line for thermoforming applications
- Year 1994 refurbished 2008
- Power connection: 3 x 380/400 volts 50 c/s
- Melting capacity: Max. approx. 400 kgs/h, deepending on constant material supply from buyer in required quality and quantity, and realistic film sizes
- Line speed: Max.

For more details on Barmag Co-extrusion Sheet Film Line click here

Davis Standard / Egan PET Sheet Line

One used Davis Standard / Egan 4-1/2" (120mm nominal diameter) extruder, 32:1 L:D, vented, air cooled barrel, heavy duty gear reducer, 250 HP (190 KW) main drive motor including full temperature contrrol panels, drive controller, 6" (150mm) screen changer hydraulic slide plate type with hydraulic power pack, included.

For more details on Davis Standard / Egan PET Sheet Line click here

HPM Sheet Line

Used HPM sheet line consisting of:
- (1) HPM 4-1/2'' single screw extruder, model 4.5TMIII. Approximately 30 to 1 L/D ratio. Electrically heated, water cooled 6 zone non-vented barrel, with pump, annd heat exchanger, no holding tank.

For more details on HPM Sheet Line click here

Davis Standard Twin Screw PVC Sheet Line

Consisting of:
- Davis Standard parallel twin screw extruder, model GP114, 100 hp AC motor with Allen Bradley 1336 AC frequency drive
- Water cooled barrel
- 5 barrel zones
- 15 Eurotherm 2208 temmperature controls
- Dynisco pressure indicator
- Screw speed, drive load, and heater amp digital readouts
- Vacuum pump and barrel vent, with Davis Standard model GPH160 material feeder
- Davis Standard EX-M-Plar two roll stack
- 24" diameter x 60" wide chill rolls
- 60" wide pull rolls with 3 hp motors, and Famco 60" shear
- 100 fpm max line speed, 1997 vintage

Optional:
3 sheet dies available
- Used 55" Cloeren, model Epoch V sheet die, equipped with auto gauge 5 push/pull adjustable lip, 0-.

For more details on Davis Standard Twin Screw PVC Sheet Line click here

30" Wide Berlyn Sheet Line

Consisting of:
- 4.5" Berlyn extruder
- 24:1 L/D ratio
- Water cooled barrel
- Belt driven Reliance 150HP DC motor
- Burton Industries speed stat VI drive
- 500 Volt
- 13.95/1 gear box ratio

- Gear box rating 222
- 1.

For more details on 30" Wide Berlyn Sheet Line click here

42" Wide Egan Sheet Extrusion Line

- Extruder vented barrel
- Screw size: 3.5"
- L/D ratio: 28:1
- Cooled water
- Horsepower 100 direct current
- Voltage: 480
- Controls Omron E5CK
- Includes 3-roll vertical chrome stack (rreplaced 2005) 12" OD x 42" wide
- 1 heavy duty die 39" wide
- 3.

For more details on 42" Wide Egan Sheet Extrusion Line click here

Used PET Sheet Line

We are a leading manufacturer of PET sheets. We need a used PET sheet line primarily to manufacture 125 micron thick sheets.
- We can consider a machine that can produce a width of 1010 mm or a linee that can manufacture 1260 mm wide sheets.

For more details on Used PET Sheet Line click here

PTI Multilayer Sheet Extrusion Lines

Used PTI multilayer sheet extrusion lines including the following:
A) Used PTI model 6000 Trident series 6" 28:1 extruder having a 7-zone electrically heated air cooled barrel at approximately a 94" centerline height.

For more details on PTI Multilayer Sheet Extrusion Lines click here

60" Wide Davis Standard Co-Extrusion Sheet Line

Used 60" wide Davis standard co-extrusion sheet extrusion line consisting of the following:
- Extruder A, 100mm Davis standard extruder
- Extruder B, Davis standard 6" extruder
- Extruder C, 2" Daavis standard extruder
- Extruder D, 2.

For more details on 60" Wide Davis Standard Co-Extrusion Sheet Line click here

Davis Standard PS Foam Sheet Line

Used Davis standard / Sencorp Tandem foam line. Equipment new or rebuilt 1997. Last used to make 52-1/2" wide finished sheet line.

Line includes the following:
- (1) Used 4.5" 32:1 Gloucester exttruder with 200 hp drive.

For more details on Davis Standard PS Foam Sheet Line click here

40" Welex Co-ex Sheet Extrusion Line

Used Welex 40" wide co-ex sheet extrusion line, tested electrically and mechanically and to be shipped in working condition. Line consists of the following:
- 115mm (4.5") Welex single screw extruderr with 7-zone water cooled vented barrel.

For more details on 40" Welex Co-ex Sheet Extrusion Line click here